Shark3030FQM Medical Fixed Type X-ray detector

Tlhaloso e Khutšoanyane:

Pixel Pitch 148 um
Pixel Matrix 2048×2048
ADC 16-bit
Fumana Mothati Phaello e mengata
Scintillator CSI/GOS
Ha e kenele metsi IPX0
Sehokedi Gigabit Ethernet
Jenereithara e phahameng ea motlakase
Matla
Tekanyetso Firmware

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Tlhaloso ea Sehlahisoa

Tlhahiso ea Shark3030FQM ke mofuta o tsitsitseng le lerata le tlaase la x ray flat panel detector e thehiloeng ho theknoloji ea Indium Gallium Zinc Oxide.Sesebelisoa sa theknoloji ea IGZO se na le melemo e mengata e sa fumaneheng ka mahlale a mang, tlhahiso ea Shark3030FQM e nka boleng bo holimo ba setšoantšo, lebelo la foreimi, le sebaka se seholo sa matla, hape Shark3030FQM e na le sethala sa phaello e ngata, ts'ebetso ena e etsa hore ho khonehe hore detector e ka ba ka bobeli. e loketse kutloisiso e phahameng le litlhoko tse kholo tsa mefuta e mengata.Ho ipapisitsoe le litšoaneleho tse kaholimo, sebui sa Shark3030FQM se ka sebelisoa haholo libakeng tsa bongaka, tsa indasteri, tsa bongaka ba liphoofolo le tsa lipatlisiso.

Lintlha tsa bohlokoa tsa theknoloji ea IGZO

Lebelo le phahameng la foreimi

Boleng bo phahameng ba setšoantšo

Thekenoloji
Sensoro IGZO
Scintillator CSI/ GOS
Sebaka se sebetsang 303 x 303 limilimithara
Pixel Matrix 2048 x 2048
Pixel Pitch 148 μm
AD Phetoho 16 likotoana
Sehokedi
Sehokelo sa Puisano Gigabit Ethernet
Taolo ea Ponahalo Pulse Sync In (Edge kapa Level) / Pulse Sync Out (Edge kapa Level)
Mokhoa oa ho sebetsa Software Mode / HVG Sync Mode / FPD Sync Mode
Lebelo la Frame 8fps (1x1) / 30fps (2x2)
Mokhoa oa tšebetso Windows7 / Windows10 OS 32 bits kapa 64 bits
Ts'ebetso ea Setsebi
Qeto 3.37 lp/mm
Range ea Matla 40-160 KV
Lag ≤ 0.8% @1st foreimi
Dynamic Range ≥88dB
Kutloelo-bohloko 740 lsb/uGy
SNR 50 dB @(20000lsb)
MTF 60% @(1 lp/mm)
25% @(2 lp/mm)
10% @(3 lp/mm)
DQE (2uGy) 65% @(0 lp/mm)
45% @(1 lp/mm)
30% @(2 lp/mm)
Mechini
Bophahamo(H x W x D) 341 x 344 x 28 limilimithara
Boima ba 'mele 4.2Kg
Boitsebiso ba Tšireletso ea Sensor Fiber ea Carbon
Thepa ea Matlo Aluminium Alloy
Tikoloho
Mocheso Range 10 ~ 35 ° ℃ (e sebetsang);-10~50℃(bolokelo)
Mongobo 30 ~ 70% RH(ha e kolekese)
Ho thothomela IEC/EN 60721-3 sehlopha sa 2M3(10~150 Hz,0.5 g)
Ho tshoha IEC/EN 60721-3 sehlopha sa 2M3(11 ms,2 g)
E Hanela Lerōle le Metsi IPX0
Matla
Phepelo 100 ~ 240 VAC
Khafetsa 50/60 Hz
Tshebediso 12W
Taolo
CFDA (Chaena)  
FDA (USA)  
CE (Europe)  
Kopo
Bongaka

Litšoantšo tsa dijithale tsa C-arm ea bongaka

Cone-beam computed tomography (CBCT)

DSA digital subtraction angiography

Mechanical Dimension
Tlhaloso: Shark3030FPM 5

 

Mabapi le rona

Ke mehlala e tšoarellang 'me e phatlalatsoa ka katleho lefatšeng ka bophara.Leha ho le joalo, ha ho na maemo a nyamelang mesebetsi e meholo ka nako e potlakileng, ke ntho ea bohlokoa ho uena ea boleng bo holimo.E tataisoa ke molao-motheo oa "Prudence, Efficiency, Union and Innovation. khamphani e etsa boiteko bo matla ba ho atolosa khoebo ea eona ea machaba, ho phahamisa phaello ea k'hamphani ea eona le ho phahamisa boemo ba eona ba ho romela thepa. e tla ajoa lefatšeng ka bophara nakong ea lilemo tse tlang.

Re thehile likamano tse matla le tse telele tsa tšebelisano 'moho le lik'hamphani tse ngata haholo khoebong ena mose ho maoatle.Ts'ebeletso ea hang-hang le e ikhethang kamora thekiso e fanoeng ke sehlopha sa rona sa baeletsi e thabisa bareki ba rona.Lintlha tse felletseng le litlhophiso tsa thepa li tla romelloa ho uena bakeng sa kananelo efe kapa efe e phethahetseng.Mehlala ea mahala e ka tlisoa 'me k'hamphani e sheba k'hamphani ea rona.Ke ts'epa hore u tla fumana lipotso 'me u thehe tšebelisano-'moho ea nako e telele.

Re nahana ka tieo hore re na le bokhoni bo felletseng ba ho u fa thepa e khotsofatsang.Ke lakatsa ho bokella lintho tse u tšoenyang le ho theha kamano e ncha ea nako e telele ea lerato.Kaofela re ts'episa haholo: theko e ntle, e ntle ea thekiso;theko e nepahetseng ea ho rekisa, boleng bo betere.


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona