Whale1613FDI A-Si series Industrial X-Ray Detector

Short Description:

Pixel Pitch	125 μm
Pixel Matrix	1024 x1248
ADC	16-bit
Gain Stage	Multi-Gain
Scintillator	GOS/CSI
Water Proof	IPX0
Interface	Gigabit Ethernet
	High voltage generator
	Power
Calibration	Software, Firmware
Radiation Hardness	≥10000Gy
Fixed Type X Ray Detector

Send email to us

Product Detail

Product Tags

Product Description

Whale1613FDI production is a fixed type and low noise x-ray flat panel detector based on amorphous silicon technology. A-Si technology based detector owns many advantages that are unavailable with other technology，Whale1613FDI production takes a high image quality and a large dynamic range, also Whale1613FDI possesses multi-gain stage, this function makes it possible that the detector can both be suitable for high sensitivity and large dynamic range requirements. Based on above characteristics, Whale1613FDI detector can be widely used in industrial SMT, electronics, lithium battery chip wire bonding inspection.

Key features for amorphous silicon technology

High dynamic range

Long life time

Technology
Sensor	A-Si
Scintillator	GOS / CSI
Active Area	160 x 128 mm
Pixel Matrix	1024 x 1248
Pixel Pitch	125 μm
AD Conversion	16 bits
Interface
Communication Interface	Gigabit Ethernet
Exposure Control	Pulse Sync In (Edge or Level) / Pulse Sync Out (Edge or Level)
Mode	Software Mode / HVG Sync Mode / FPD Sync Mode
Frame Speed	30fps
Operating System	Windows7 / Windows10 OS 32 bits or 64 bits
Technical Performance
Resolution	4.0 lp/mm
Energy Range	40-160 KV
Lag	0.8% @1st frame
Dynamic Range	≥ 86dB
Sensitivity	460 lsb/uGy
SNR	49 dB @(20000lsb)
MTF	75% @(1 lp/mm)
	46% @(2 lp/mm)
	27% @(3 lp/mm)
DQE	58% @(0 lp/mm)
	43% @(1 lp/mm)
	30% @(2 lp/mm)
Mechanical
Dimension(HxWxD)	196 x 162 x 37.5 mm
Weight	1.5 Kg
Sensor Protection Material	Carbon Fiber
Housing Material	Aluminum Alloy
Environmental
Temperature Range	10~35℃(operating); -10~50℃(storage)
Humidity	30~70% RH(non-condensing)
Vibration	IEC/EN 60721-3 class 2M3(10~150 Hz, 0.5 g)
Shock	IEC/EN 60721-3 class 2M3(11 ms, 2 g)
Dust and Water Resistant	IPX0
Power
Supply	100~240 VAC
Frequency	50/60 Hz
Consumption	8W
Application
Industry	SMT, Electronics, Lithium Battery Chip and Wire Bonding Inspection
Mechanical Dimension