● Large area imaging, no edge image distortion
● Acquisition frame rate of 30 fps
● Sensitivity comparable to image intensifiers
● Better dynamic range and image signal-to-noise ratio than image intensifier
Whale2121FDM is a 21 x 21 cm real-time, fixed amorphous silicon, digital X-ray flat panel detector. It features excellent sensitivity and high dynamic range modes. The Whale2121FDM structural design effectively reduces the bending radius of the detector outlet, shortening the wiring space for easy installation and integration of systems. Its embedded firmware image calibration minimizes the difficulty of software development and resource consumption for computer hardware configuration. Suitable for digital imaging of medical c-arm, image intensifier replacement, and upgrade.


Technology |
|
Sensor |
A-Si |
Scintillator |
CSI / GOS |
Active Area |
204 x 204 mm |
Pixel Matrix |
1024 x 1024 |
Pixel Pitch |
200 μm |
AD Conversion |
16 bits |
Interface |
|
Data Interface |
Gigabit Ethernet |
Exposure Control |
Pulse Sync In / Pulse Sync Out |
Work Mode |
Software Mode / HVG Sync Mode / FPD Sync Mode |
Frame Speed |
30 fps (1x1) |
Operating System |
Windows7 / Windows10 OS 32 bits or 64 bits |
Technical Performance |
|
Resolution |
2.5 lp/mm |
Energy Range |
40-160 KV |
Lag |
0.8% @1st frame |
Dynamic Range |
≥86dB |
Sensitivity |
1100 lsb/uGy |
SNR |
50 dB @(20000lsb) |
MTF |
55% @(1 lp/mm) |
32% @(2 lp/mm) |
|
13% @(3 lp/mm) |
|
DQE |
73% @(0 lp/mm) |
48% @(1 lp/mm) |
|
28% @(2 lp/mm) |
|
Mechanical |
|
Dimension(H x W x D) |
241 x 241 x 45 mm |
Weight |
3.6 Kg |
Sensor Protection Material |
Carbon Fiber |
Housing Material |
Aluminum Alloy |
Environmental |
|
Temperature Range |
10~35℃(operating);-10~50℃(storage) |
Humidity |
30~70% RH(non-condensing) |
Vibration |
IEC/EN 60721-3 class 2M3(10~150 Hz,0.5 g) |
Shock |
IEC/EN 60721-3 class 2M3(11 ms,2 g) |
Dust and Water Resistant |
IPX0 |
Power |
|
Supply |
100~240 VAC |
Frequency |
50/60 Hz |
Consumption |
10W |
