● Large area imaging, no edge image distortion
● The frame rate of Max. 8 fps (1x1) and Max. 16 fps (2x2)
● Sensitivity comparable to image intensifiers
● Better dynamic range and image signal-to-noise ratio than image intensifier
Whale3030FQM is a 30 x 30 cm real-time, fixed amorphous silicon, digital X-ray flat panel detector. It features excellent sensitivity and high dynamic range modes. The Whale3030FQM structural design effectively reduces the bending radius of the detector outlet, shortening the wiring space for easy installation and integration of systems. Its embedded firmware image calibration minimizes the difficulty of software development and resource consumption for computer hardware configuration. Suitable for bone densitometry.
|
Technology |
|
|
Sensor |
A-Si |
|
Scintillator |
CSI / GOS |
|
Active Area |
286 x 286 mm |
|
Pixel Matrix |
2048 x 2048 |
|
Pixel Pitch |
140 μm |
|
AD Conversion |
16 bits |
|
Interface |
|
|
Data Interface |
Gigabit Ethernet |
|
Exposure Control |
Pulse Sync In / Pulse Sync Out |
|
Frame Speed |
8 fps (1x1) / 16 fps (2x2) |
|
Operating System |
Windows7 / Windows10 OS 32 bits or 64 bits |
|
Technical Performance |
|
|
Resolution |
3.5 lp/mm |
|
Energy Range |
40-160 KV |
|
Lag |
0.8% @1st frame |
|
Dynamic Range |
≥86dB |
|
Sensitivity |
620 lsb/uGy |
|
SNR |
49 dB @(20000lsb) |
|
MTF |
72% @(1 lp/mm) |
|
44% @(2 lp/mm) |
|
|
25% @(3 lp/mm) |
|
|
DQE |
66% @(0 lp/mm) |
|
42% @(1 lp/mm) |
|
|
28% @(2 lp/mm) |
|
|
Mechanical |
|
|
Dimension(H x W x D) |
322 x 322 x 50.5 mm |
|
Weight |
3.0 Kg |
|
Sensor Protection Material |
Carbon Fiber |
|
Housing Material |
Aluminum Alloy |
|
Environmental |
|
|
Temperature Range |
10~35℃(operating);-10~50℃(storage) |
|
Humidity |
30~70% RH(non-condensing) |
|
Vibration |
IEC/EN 60721-3 class 2M3(10~150 Hz,0.5 g) |
|
Shock |
IEC/EN 60721-3 class 2M3(11 ms,2 g) |
|
Dust and Water Resistant |
IPX0 |
|
Power |
|
|
Supply |
100~240 VAC |
|
Frequency |
50/60 Hz |
|
Consumption |
10W |
