Whale4343FQI-XM Fixed Industrial X-ray Detector

Short Description:

Pixel Pitch 100 μm
Pixel Matrix 4288 x 4288 
ADC 16 bits 
Gain Stage Multi-Gain
Scintillator CSI / GOS
Water Proof IPX0
Interface Optical Fiber
High voltage generator
Calibration Software, Firmware
Radiation Hardness ≥10000Gy

Product Detail

Product Tags

Product Description

Whale4343FQI-XM production is a fixed type and low noise x-ray flat panel detector based on amorphous silicon technology. A-Si technology based detector owns many advantages that are unavailable with other technology, Whale4343FQI-XM production takes a high image quality and a large dynamic range, also Whale4343FQI-XM possesses multi-gain stage, this function makes it possible that the detector can both be suitable for high sensitivity and large dynamic range requirements. Based on above characteristics, Whale4343FQI-XM detector can be widely used in NDT, Electronics, X Ray Chip Counter, Industrial CT Application.

Whale4343FQI-XM as compared with Whale4343FQI has higher spatial resolution and higher resolution so it can obtain higher resolution images in less time. Whale4343FQI-XM also has a higher energy range, which can be better applied to the high-end requirements of industrial testing.

Key features for amorphous silicon technology

u High dynamic range

u Long life time

Sensor     A-Si
Scintillator     CSI / GOS
Active Area     428.8 x 428.8 mm
Pixel Matrix     4288 x 4288
Pixel Pitch     100 μm
AD Conversion     16 bits
Communication Interface     Optical Fiber
Exposure Control    Trigger In (Edge or Level) / Trigger Out  (Edge or Level)
Frame Speed    8fps (1x1) / 16fps (2x2)
Operating System   Windows7 / Windows10 OS 32 bits or 64 bits
Technical Performance
Resolution 5.0 lp/mm
Energy Range 40-350 KV
Lag    ≤0.8% 1st frame
Dynamic Range    ≥76dB
Sensitivity    360 lsb/uGy
SNR    47 dB @(20000lsb)
MTF    75% @(1 lp/mm)
48% @(2 lp/mm)
29% @(3 lp/mm)
DQE 52% @(0 lp/mm)
38% @(1 lp/mm)
21% @(2 lp/mm)
Dimension(H x W x D)    470 x 470 x 34.5 mm
Weight    12.7 Kg
Sensor Protection Material   Carbon Fiber
Housing Material    High Strength Aluminum Alloy
Temperature Range    10~35℃(operating);-10~50℃(storage)
Humidity     30~70% RH(non-condensing)
Vibration     IEC/EN 60721-3 class 2M3(10~150 Hz,0.5 g)
Shock    IEC/EN 60721-3 class 2M3(11 ms,2 g)
Dust and Water Resistant     IPX0
Supply    100~240 VAC
Frequency    50/60 Hz
Consumption     18W

NDT (Non-Destructive Testing)

X Ray Chip Counter

Application Industrial CT

Mechanical Dimension

 Whale4343FQI-XM 2 Whale4343FQI-XM 3 

  • Previous:
  • Next:

  • Write your message here and send it to us