Good quality Cone Beam Machine - Dolphin0606FDI CMOS Industrial X-ray detector – haobo Detail:
Dolphin0606FDI production is a fixed type and low noise x-ray flat panel detector based on CMOS. CMOS sensors use a single crystal silicon process for chip fabrication. Direct integral amplification within pixel cells leads to lower electronic noise, higher signal-to-noise ratio, and higher quantum detection efficiency (DQE) than amorphous silicon, so CMOS sensors are particularly suitable for low-dose imaging scenarios. Based on above characteristics, Dolphin0606FDI detector can be widely used in industrial SMT, electronics, lithium battery and chip wire bonding inspection.
Electronic noise is lower
Higher signal-to-noise ratio
|
Technology |
|
|
Sensor |
CMOS |
|
Scintillator |
CSI |
|
Active Area |
60 x 53.5 mm |
|
Pixel Matrix |
1200 x 1056 |
|
Pixel Pitch |
50 μm |
|
AD Conversion |
14 bits |
|
Interface |
|
|
Communication Interface |
Optical Fiber |
|
Exposure Control |
Pulse Sync In (Edge or Level) / Pulse Sync Out (Edge or Level) |
|
Work Mode |
Software Mode / HVG Sync Mode / FPD Sync Mode |
|
Frame Speed |
51fps (1×1) |
|
Operating System |
Windows7 / Windows10 OS 32 bits or 64 bits |
|
Technical Performance |
|
|
Resolution |
10.0 lp/mm |
|
Energy Range |
40~160 KV |
|
Lag |
0.01% @1st frame |
|
Dynamic Range |
≥ 73dB |
|
Sensitivity |
100 lsb/uGy |
|
SNR |
48 dB @(20000lsb) |
|
MTF |
90% @(1 lp/mm) |
|
82% @(2 lp/mm) |
|
|
74% @(3 lp/mm) |
|
|
DQE (2uGy) |
65% @(0 lp/mm) |
|
48% @(1 lp/mm) |
|
|
37% @(2 lp/mm) |
|
|
Mechanical |
|
|
Dimension(H x W x D) |
171 x 171 x 37 mm |
|
Weight |
2.8 Kg |
|
Sensor Protection Material |
Carbon Fiber |
|
Housing Material |
Aluminum Alloy |
|
Environmental |
|
|
Temperature Range |
10~35°℃ (operating); -10~50℃(storage) |
|
Humidity |
30~70% RH(non-condensing) |
|
Vibration |
IEC/EN 60721-3 class 2M3(10~150 Hz,0.5 g) |
|
Shock |
IEC/EN 60721-3 class 2M3(11 ms,2 g) |
|
Dust and Water Resistant |
IPX0 |
|
Power |
|
|
Supply |
100~240 VAC |
|
Frequency |
50/60 Hz |
|
Consumption |
6 W |
|
Application |
|
|
Industrial |
SMT, Electronics, Lithium Battery Chip Wire Bonding Inspection |
|
Mechanical Dimension |
|
Product detail pictures:
Related Product Guide:
Dependable good quality and very good credit score standing are our principles, which will help us at a top-ranking position. Adhering towards the tenet of "quality initial, shopper supreme" for Good quality Cone Beam Machine - Dolphin0606FDI CMOS Industrial X-ray detector – haobo , The product will supply to all over the world, such as: Paris, Portugal, Bangalore, So We also continuously function. we, focuse on high quality, and are conscious of the importance of environmental protection, most of the merchandise are pollution-free, environmentally friendly products, reuse on the solution. We've Updated our catalog, which introduces our organization. n detail and covers the primary items we provide at present, You may also visit our web-site, which involves our most recent product line. We look forward to reactivating our company connection.
By Joseph from Netherlands - 2018.06.21 17:11
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Jean Ascher from Mongolia - 2017.12.09 14:01
Products categories
-
Hot sale Cmos X Ray Detector - Custom plate de...
-
Reasonable price for Digital Mobile X Ray Machi...
-
OEM Manufacturer Dental Digital Xrays - Custom...
-
Hot Selling for Dental Cone Scan - Dolphin0606...
-
Renewable Design for Sensor Digital Periapical ...
-
Personlized Products Cr System Radiology - Do...
