Good quality Dr Radiography System - Dolphin0606FDI CMOS Industrial X-ray detector – haobo Detail:
Dolphin0606FDI production is a fixed type and low noise x-ray flat panel detector based on CMOS. CMOS sensors use a single crystal silicon process for chip fabrication. Direct integral amplification within pixel cells leads to lower electronic noise, higher signal-to-noise ratio, and higher quantum detection efficiency (DQE) than amorphous silicon, so CMOS sensors are particularly suitable for low-dose imaging scenarios. Based on above characteristics, Dolphin0606FDI detector can be widely used in industrial SMT, electronics, lithium battery and chip wire bonding inspection.
Electronic noise is lower
Higher signal-to-noise ratio
|
Technology |
|
|
Sensor |
CMOS |
|
Scintillator |
CSI |
|
Active Area |
60 x 53.5 mm |
|
Pixel Matrix |
1200 x 1056 |
|
Pixel Pitch |
50 μm |
|
AD Conversion |
14 bits |
|
Interface |
|
|
Communication Interface |
Optical Fiber |
|
Exposure Control |
Pulse Sync In (Edge or Level) / Pulse Sync Out (Edge or Level) |
|
Work Mode |
Software Mode / HVG Sync Mode / FPD Sync Mode |
|
Frame Speed |
51fps (1×1) |
|
Operating System |
Windows7 / Windows10 OS 32 bits or 64 bits |
|
Technical Performance |
|
|
Resolution |
10.0 lp/mm |
|
Energy Range |
40~160 KV |
|
Lag |
0.01% @1st frame |
|
Dynamic Range |
≥ 73dB |
|
Sensitivity |
100 lsb/uGy |
|
SNR |
48 dB @(20000lsb) |
|
MTF |
90% @(1 lp/mm) |
|
82% @(2 lp/mm) |
|
|
74% @(3 lp/mm) |
|
|
DQE (2uGy) |
65% @(0 lp/mm) |
|
48% @(1 lp/mm) |
|
|
37% @(2 lp/mm) |
|
|
Mechanical |
|
|
Dimension(H x W x D) |
171 x 171 x 37 mm |
|
Weight |
2.8 Kg |
|
Sensor Protection Material |
Carbon Fiber |
|
Housing Material |
Aluminum Alloy |
|
Environmental |
|
|
Temperature Range |
10~35°℃ (operating); -10~50℃(storage) |
|
Humidity |
30~70% RH(non-condensing) |
|
Vibration |
IEC/EN 60721-3 class 2M3(10~150 Hz,0.5 g) |
|
Shock |
IEC/EN 60721-3 class 2M3(11 ms,2 g) |
|
Dust and Water Resistant |
IPX0 |
|
Power |
|
|
Supply |
100~240 VAC |
|
Frequency |
50/60 Hz |
|
Consumption |
6 W |
|
Application |
|
|
Industrial |
SMT, Electronics, Lithium Battery Chip Wire Bonding Inspection |
|
Mechanical Dimension |
|
Product detail pictures:
Related Product Guide:
We can always satisfy our respected customers with our good quality, good price and good service due to we are more professional and more hard-working and do it in cost-effective way for Good quality Dr Radiography System - Dolphin0606FDI CMOS Industrial X-ray detector – haobo , The product will supply to all over the world, such as: Colombia, India, Canberra, We offer OEM services and replacement parts to meet the varying needs of our customers. We offer competitive price for quality products and we will make certain your shipment is handled quickly by our logistics department. We sincerely hope to have the opportunity to meet with you and see how we can help you further your own business.
By Olga from Accra - 2018.12.30 10:21
High production efficiency and good product quality, fast delivery and completed after-sale protection, a right choice, a best choice.
By Gloria from Qatar - 2017.05.02 18:28
Products categories
-
Special Price for X Ray Inspection System - Do...
-
OEM China Introduction To Biomedical Imaging Sy...
-
Factory directly Cone Beam Scan - Dolphin0606F...
-
Competitive Price for Medical Diagnostic Imagin...
-
2022 Latest Design X Ray Scan - Custom plate ...
-
Good quality Cone Beam Machine - Dolphin0606FD...
