Hot-selling Cone Beam Dental Scan - Dolphin0606FDI CMOS Industrial X-ray detector – haobo

Short Description:

Send email to us

Product Detail

Product Tags

Feedback (2)

We retain bettering and perfecting our merchandise and service. At the same time, we do the job actively to do research and improvement for Thin Film Transistor Radiography, Silicon Drift Detector Principle, Portable Digital X Ray Machine Price, To learn more about what we can do for you, contact us at any time. We look forward to establishing good and long-term business relationships with you.

Hot-selling Cone Beam Dental Scan - Dolphin0606FDI CMOS Industrial X-ray detector – haobo Detail:

Dolphin0606FDI production is a fixed type and low noise x-ray flat panel detector based on CMOS. CMOS sensors use a single crystal silicon process for chip fabrication. Direct integral amplification within pixel cells leads to lower electronic noise, higher signal-to-noise ratio, and higher quantum detection efficiency (DQE) than amorphous silicon, so CMOS sensors are particularly suitable for low-dose imaging scenarios. Based on above characteristics, Dolphin0606FDI detector can be widely used in industrial SMT, electronics, lithium battery and chip wire bonding inspection.

Electronic noise is lower

Higher signal-to-noise ratio

Technology
Sensor	CMOS
Scintillator	CSI
Active Area	60 x 53.5 mm
Pixel Matrix	1200 x 1056
Pixel Pitch	50 μm
AD Conversion	14 bits
Interface
Communication Interface	Optical Fiber
Exposure Control	Pulse Sync In (Edge or Level) / Pulse Sync Out (Edge or Level)
Work Mode	Software Mode / HVG Sync Mode / FPD Sync Mode
Frame Speed	51fps (1×1)
Operating System	Windows7 / Windows10 OS 32 bits or 64 bits
Technical Performance
Resolution	10.0 lp/mm
Energy Range	40~160 KV
Lag	0.01% @1st frame
Dynamic Range	≥ 73dB
Sensitivity	100 lsb/uGy
SNR	48 dB @(20000lsb)
MTF	90% @(1 lp/mm)
	82% @(2 lp/mm)
	74% @(3 lp/mm)
DQE (2uGy)	65% @(0 lp/mm)
	48% @(1 lp/mm)
	37% @(2 lp/mm)
Mechanical
Dimension(H x W x D)	171 x 171 x 37 mm
Weight	2.8 Kg
Sensor Protection Material	Carbon Fiber
Housing Material	Aluminum Alloy
Environmental
Temperature Range	10~35°℃ (operating); -10~50℃(storage)
Humidity	30~70% RH(non-condensing)
Vibration	IEC/EN 60721-3 class 2M3(10~150 Hz,0.5 g)
Shock	IEC/EN 60721-3 class 2M3(11 ms,2 g)
Dust and Water Resistant	IPX0
Power
Supply	100~240 VAC
Frequency	50/60 Hz
Consumption	6 W
Application
Industrial	SMT, Electronics, Lithium Battery Chip Wire Bonding Inspection
Mechanical Dimension

Product detail pictures:

Related Product Guide:

We support our buyers with ideal high quality products and high level service. Becoming the specialist manufacturer in this sector, we have gained rich practical experience in producing and managing for Hot-selling Cone Beam Dental Scan - Dolphin0606FDI CMOS Industrial X-ray detector – haobo , The product will supply to all over the world, such as: Maldives, Uzbekistan, Pakistan, We win many reliable customers by rich experience, advanced equipments, skilled teams, strict quality control and best service. We can guarantee all our products. Customers' benefit and satisfaction are always our biggest goal. Please contact us. Give us a chance, give you a surprise.

3d Beam Cone Scan