Mmepụta Whale3025FPI bụ ụdị edobere yana ihe nyocha oghere x-ray dị ala dabere na teknụzụ silicon amorphous.Ihe nchọpụta teknụzụ A-Si nwere ọtụtụ uru ndị na-adịghị na teknụzụ ndị ọzọ, mmepụta Whale3025FPI na-ewe ogo onyonyo dị elu yana oke ike, yana Whale3025FPI nwere ọkwa uru dị iche iche, ọrụ a na-eme ka onye nyocha ahụ nwee ike dabara adaba maka ya. elu uche na nnukwu ike nso chọrọ.Dabere na njirimara dị n'elu, enwere ike iji ihe nchọpụta Whale3025FPI mee ihe na ụlọ ọrụ CT.
Oke ike dị elu
Ogologo oge ndụ
| Nkà na ụzụ | |
| Ihe mmetụta | A-Si |
| Scintillator | CSI / GOS |
| Mpaghara nọ n'ọrụ | 250 x 286 mm |
| Pixel Matrix | 1792 x 2048 |
| Pixel Pitch | 140 μm |
| Ngbanwe AD | 16 ibeji |
| Interface | |
| Interface nkwurịta okwu | Fiber ngwa anya |
| Njikwa ngosi | Mmekọrịta Pulse In (Edge ma ọ bụ ọkwa) / Pulse Sync Out (Edge or Level) |
| Ụdị | Ụdị ngwanrọ/Ụdị mmekọrịta HVG/ Ọnọdụ mmekọrịta FPD |
| Frame Speed | 20fps (1x1) |
| Sistemụ nrụọrụ | Windows 7 / Windows 10 OS 32-bit ma ọ bụ 64-bit |
| Nrụ ọrụ nka | |
| Mkpebi | 3.5 lp / mm |
| Oke ike | 40-160 KV |
| Lag | ≤1% @1st frame |
| Oke dị ike | ≥86dB |
| Mmetụta | 540 lb/uGy |
| SNR | 48dB @(20000lsb) |
| MTF | 70% @(1 lp/mm) |
| 38% @(2 lp/mm) | |
| 21% @(3 lp/mm) | |
| DQE | 58% @(0 lp/mm) |
| 41% @(1 lp/mm) | |
| 25% @(2 lp/mm) | |
| Mechanical | |
| Akụkụ (H x W x D) | 322 x 285x 46.5 mm |
| Ibu | 2.5 n'arọ |
| Ihe nchekwa ihe mmetụta | Carbon Fiber |
| Ihe eji eme ụlọ | Aluminom Alloy |
| gburugburu ebe obibi | |
| Oke okpomọkụ | 10 ~ 35°℃ (na-arụ ọrụ); -10 ~ 50℃ (nchekwa) |
| iru mmiri | 30 ~ 70% RH (na-abụghị condensing) |
| Mmaji | IEC / EN 60721-3 Klas 2M3 (10 ~ 150 Hz, 0.5 g) |
| Ujo | IEC/EN 60721-3 Klas 2M3(11ms,2 g) |
| Uzuzu na mmiri na-eguzogide | IPX0 |
| Ike | |
| Nkwanye | 100-240 VAC |
| Ugboro ugboro | 50/60 Hz |
| Oriri | 10W |
| Nhazi | |
| CFDA (China) | |
| FDA (USA) | |
| CE (Europe) | |
| Ngwa | |
| Ụlọ ọrụ mmepụta ihe | Ụlọ ọrụ CT |
| Akụkụ Mechanical | |
|
| |
Dee ozi gị ebe a ziga anyị ya
