OEM China Introduction To Biomedical Imaging Systems - Dolphin0606FDI CMOS Industrial X-ray detector – haobo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We have state-of-the-art equipment. Our products are exported for the USA, the UK and so on, enjoying a fantastic status among the clients for Xray Detectors, Dr Detector, Cone Beam Scan Dental, Our company has already set up a professional, creative and responsible team to develop clients with the multi-win principle.
OEM China Introduction To Biomedical Imaging Systems - Dolphin0606FDI CMOS Industrial X-ray detector – haobo Detail:

Dolphin0606FDI production is a fixed type and low noise x-ray flat panel detector based on CMOS. CMOS sensors use a single crystal silicon process for chip fabrication. Direct integral amplification within pixel cells leads to lower electronic noise, higher signal-to-noise ratio, and higher quantum detection efficiency (DQE) than amorphous silicon, so CMOS sensors are particularly suitable for low-dose imaging scenarios. Based on above characteristics, Dolphin0606FDI detector can be widely used in industrial SMT, electronics, lithium battery and chip wire bonding inspection.

Electronic noise is lower

Higher signal-to-noise ratio

Technology

Sensor

CMOS

Scintillator

CSI

Active Area

60 x 53.5 mm

Pixel Matrix

1200 x 1056

Pixel Pitch

50 μm

AD Conversion

14 bits

Interface

Communication Interface

Optical Fiber

Exposure Control 

Pulse Sync In (Edge or Level) / Pulse Sync Out (Edge or Level)

Work Mode

Software Mode / HVG Sync Mode / FPD Sync Mode

Frame Speed

51fps (1×1)

Operating System 

Windows7 / Windows10 OS 32 bits or 64 bits

Technical Performance

Resolution

10.0 lp/mm

Energy Range

40~160 KV

Lag 

0.01% @1st frame

Dynamic Range 

≥ 73dB

Sensitivity 

100 lsb/uGy

SNR 

48 dB @(20000lsb)

MTF 

90% @(1 lp/mm)

82% @(2 lp/mm)

74% @(3 lp/mm)

DQE (2uGy) 

65% @(0 lp/mm)

48% @(1 lp/mm)

37% @(2 lp/mm)

Mechanical

Dimension(H x W x D) 

171 x 171 x 37 mm

Weight 

2.8 Kg

Sensor Protection Material

Carbon Fiber

Housing Material 

Aluminum Alloy

Environmental

Temperature Range 

10~35°℃ (operating); -10~50℃(storage)

Humidity

30~70% RH(non-condensing)

Vibration

IEC/EN 60721-3 class 2M3(10~150 Hz,0.5 g)

Shock 

IEC/EN 60721-3 class 2M3(11 ms,2 g)

Dust and Water Resistant

IPX0

Power

Supply 

100~240 VAC

Frequency 

50/60 Hz

Consumption

6 W

Application

Industrial

SMT, Electronics, Lithium Battery

Chip Wire Bonding Inspection

Mechanical Dimension


Product detail pictures:

OEM China Introduction To Biomedical Imaging Systems - Dolphin0606FDI CMOS Industrial X-ray detector – haobo detail pictures

OEM China Introduction To Biomedical Imaging Systems - Dolphin0606FDI CMOS Industrial X-ray detector – haobo detail pictures

OEM China Introduction To Biomedical Imaging Systems - Dolphin0606FDI CMOS Industrial X-ray detector – haobo detail pictures


Related Product Guide:

The corporation keeps to the operation concept "scientific management, superior quality and performance primacy, consumer supreme for OEM China Introduction To Biomedical Imaging Systems - Dolphin0606FDI CMOS Industrial X-ray detector – haobo , The product will supply to all over the world, such as: Naples, Sao Paulo, Bangalore, We are proud to supply our products to every auto fan all around the world with our flexible, fast efficient services and strictest quality control standard which has always approved and praised by customers.
  • In China, we have purchased many times, this time is the most successful and most satisfactory, a sincere and realiable Chinese manufacturer!
    5 Stars By Jill from Indonesia - 2017.06.16 18:23
    The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
    5 Stars By Daisy from South Africa - 2018.06.18 17:25
    Write your message here and send it to us