● Embedded image calibration feature for easy integration
● Pixel pitch 148 μm
● Low-noise, excellent dynamic image even at a low dose
● High speed without image delay
● The frame rate of Max. 30 fps (1x1) and Max. 60 fps (2x2)
● Direct deposition Cesium Iodide (CsI) Scintillator effectively reduces light scattering between pixels
Shark3030FDM is a 30 x 30 cm fixed type, dynamic flat panel detector based on Indium Gallium Zinc Oxide technology. The advanced IGZO TFT with CsI Scintillator provides an ultra low-noise image at a low dose and a high acquisition frame rate. It features excellent sensitivity and high dynamic range modes for high-end applications including cardiac and cerebral angiography. Shark3030FDM structural design effectively reduces the bending radius of the detector outlet, shortening the wiring space for easy installation and integration of systems. It performs well in C-arm systems.
|
Technology |
|
|
Sensor |
IGZO |
|
Scintillator |
CSI |
|
Active Area |
303 x 303 mm |
|
Pixel Matrix |
2048 x 2048 |
|
Pixel Pitch |
148 μm |
|
AD Conversion |
16 bits |
|
Interface |
|
|
Data Interface |
10G Ethernet |
|
Exposure Control |
Pulse Sync In / Pulse Sync Out |
|
Work Mode |
Software Mode / HVG Sync Mode / FPD Sync Mode |
|
Frame Speed |
30 fps (1x1) / 60fps (2x2) |
|
Operating System |
Windows7 / Windows10 OS 32 bits or 64 bits |
|
Technical Performance |
|
|
Resolution |
3.37 lp/mm |
|
Energy Range |
40-160 KV |
|
Lag |
0.8% @1st frame |
|
Dynamic Range |
≥88dB |
|
Sensitivity |
740 lsb/uGy |
|
SNR |
50 dB @(20000lsb) |
|
MTF |
70% @(1 lp/mm) |
|
42% @(2 lp/mm) |
|
|
23% @(3 lp/mm) |
|
|
DQE |
68% @(0 lp/mm) |
|
43% @(1 lp/mm) |
|
|
28% @(2 lp/mm) |
|
|
Mechanical |
|
|
Dimension(H x W x D) |
344 x 341 x 28 mm |
|
Weight |
4.2 Kg |
|
Sensor Protection Material |
Carbon Fiber |
|
Housing Material |
Aluminum Alloy |
|
Environmental |
|
|
Temperature Range |
10~35℃(operating);-10~50℃(storage) |
|
Humidity |
30~70% RH(non-condensing) |
|
Vibration |
IEC/EN 60721-3 class 2M3(10~150 Hz,0.5 g) |
|
Shock |
IEC/EN 60721-3 class 2M3(11 ms,2 g) |
|
Dust and Water Resistant |
IPX0 |
|
Power |
|
|
Supply |
100~240 VAC |
|
Frequency |
50/60 Hz |
|
Consumption |
12W |
