Whale1613FDI-M Mofuta o Tsitsitseng oa Mofuta oa Indasteri oa X-ray Setšoantšo se Hlahang

Mofuta o Tsitsitseng oa Mofuta oa Indasteri oa X-ray oa Whale1613FDI-M

Tlhaloso e Khutšoanyane:

Pixel Pitch	125 μm
Pixel Matrix	1024 x1280
ADC	16 likotoana
Fumana Mothati	Phaello e mengata
Scintillator	GOS/CSI
Ha e kenele metsi	IPX0
Sehokedi	Gigabit Ethernet
	Jenereithara e phahameng ea motlakase
	Matla
Tekanyetso	Software, Firmware
Matla a Mahlaseli	≥10000Gy

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Tlhaloso ea Sehlahisoa

Tlhahiso ea Whale1613FDI-M ke mofuta o tsitsitseng le lerata le tlaase la x-ray flat panel detector e thehiloeng ho theknoloji ea silicon ea amorphous.Tlhahiso ea Whale1613FDI-M e nka boleng bo phahameng ba setšoantšo le mefuta e mengata e matla, hape Whale1613FDI-M e na le sethala sa phaello e ngata, ts'ebetso ena e etsa hore ho khonehe hore detector e ka ba e loketseng kutloisiso e phahameng le litlhoko tse kholo tsa mefuta e mengata.Ho itšetlehile ka litšobotsi tse ka holimo, Whale1613FDI-M X-ray flat panel detector e na le qeto e phahameng, 30fps, 350kV ray tshireletso 'me e loketse SMT microfocus, CT ea indasteri le maemo a mang a phahameng a foreimi.

Lintlha tsa bohlokoa bakeng sa theknoloji ea amorphous silicon

• High dynamic range

• Nako e telele ea ho hanyetsa mahlaseli a bophelo

Thekenoloji
Sensoro	A-Si
Scintillator	GOS / CSI
Sebaka se sebetsang	160 x 128 limilimithara
Pixel Matrix	1024 x 1280
Pixel Pitch	125 μm
AD Phetoho	16 likotoana
Sehokedi
Sehokelo sa Puisano	Gigabit Ethernet
Taolo ea Ho pepeseha	Pulse Sync In (Edge kapa Level) / Pulse Sync Out (Edge kapa Level)
Mokhoa	Software Mode / HVG Sync Mode / FPD Sync Mode
Lebelo la Frame	30fps(1x1)
Mokhoa oa tšebetso	Windows7 / Windows10 OS 32 bits kapa 64 bits
Ts'ebetso ea Setsebi
Qeto	4.0 lp/mm
Range ea Matla	40-350 KV
Lag	＜1% @ 1st foreimi
Dynamic Range	≥86dB
Kutloelo-bohloko	460 lsb/uGy
SNR	49 dB @(20000lsb)
MTF	75% @(1 lp/mm)
	41% @(2 lp/mm)
	25% @(3 lp/mm)
DQE	62% @(0 lp/mm)
	45% @(1 lp/mm)
	28% @(2 lp/mm)
Mechini
Dimension(HxWxD)	196 x 162x 37.5 limilimithara
Boima ba 'mele	2.8 Kg
Boitsebiso ba Tšireletso ea Sensor	Fiber ea Carbon
Thepa ea Matlo	Aluminium Alloy
Tikoloho
Mocheso Range	10 ~ 35℃(e sebetsang);-10~50℃(bolokelo)
Mongobo	30 ~ 70% RH(ha e kolekese)
Ho thothomela	IEC/EN 60721-3 sehlopha sa 2M3(10~150 Hz, 0.5 g)
Ho tshoha	IEC/EN 60721-3 sehlopha sa 2M3(11 ms, 2 g)
E Hanela Lerōle le Metsi	IPX0
Matla
Phepelo	100 ~ 240 VAC
Khafetsa	50/60 Hz
Tshebediso	8W
Taolo
CFDA (Chaena)
FDA (USA)
CE (Europe)
Kopo
Indasteri	SMT, Electronics, Lithium Battery Chip le Wire Bonding Inspection
Mechanical Dimension